AN150

previous arrow
next arrow
Slider

Made in Sweden

  • Excellent quality-design from Interoc and refined in Sweden
  • High technology but in a traditional design
  • Flexible by the machine being modular
  • Danfoss hydraulics controlled with Can bus
  • Can bus control means faster and more efficient reaction between controls and hydraulics
  • Fully remote controlled, HBC remote control, Danfoss Plus1 Micro controller,  with SPD’s software
  • Colour display showing X & Y, feed pressure, length measurement, hydraulic pressure, air pressure, service intervals and much more
  • Since the machine is remotely controlled, the operator can take the safest place with regard to work moments
  • GSM for online monitoring, troubleshooting
  • Cummins quality engine QSB 6.7
  • High oil flow maximized for well-balanced hydraulic temperature
  • Environmentally more efficient than most rigs on the market
  • Low diesel consumption
  • Fewer hydraulic hoses, equal to less environmental impact and less risk of oil leakage, lower maintenance costs
  • Fewer power cables, provide easier troubleshooting, but also less risk of problems
Drive engine Cummins QS B 6.7,CM2350 B136C,
Environmental standards EU Stage V (5)
Engine output 209 kW @ 2200 rpm
Diesel tank capacity 300 lit
Hydraulic pump output P1 230 lit/min @ 320 bar
P2 230 lit/min @ 320 bar
P 3 120 lit/min @ 320 bar
Hydraulic tank capacity 600 lit
Hydraulic fluids Mineral oil or biodegradable oil
Length (transport) 7915 mm
Width 2350 mm
Height (transport) 3035 mm
Weight without drill head and magazine 18000 kg
Specific ground pressure 74 kN/m2
Ground clearance 350 mm
Pendelum range of crawlers + 15° / – 15°
Travelling speed 2,5 km/h
Traction force 135 kN
Mast length 7900 mm (7600 mm without winch)
Usable cradle stroke (single head) 5600 mm
Usable cradle stroke (double head) 4370 mm
Max. permissible rotation torque for
working with rotary head		 20 kNm
Feed force 115 kN
Retraction force 115 kN
Feed speed 0-25 m/min
Retraction speed 0-25 m/min
Rapid feed speed 0-60 m/min
Rapid retraction speed 0-60 m/min
Clamping and breaking device Double Ø250 mm, 50 kNm
Control HBC/SPD Can bus remote control standard
Hydraulic drifters (available at option) Eurodrill RH10X, RH16X, RH24X, RH32X, DH10, DH16, DH24
Rotary heads (available at option) Eurodrill RH10X, RH16X, RH24X, RH32X, DH10, DH16, DH24
Additional equipment KBM 130 Arc magazine (7xØ88,9 mm + 7x Ø133mm), KBM 150 (7XØ88,9mm + 7×152,4mm), Palfinger crane with manipulator, slewing 20 kN winch, optional double Ø350 mm clamping table, 100 kNm

A7-S25

A7-S25 Anchor drilling rig

Anchor drilling rig with 7 meter stroke, 90 degree tilting angle and 90 degree slewing function, mounted on a extremely powerful carrier

Mast attachment A7 (DM85)
Cradle stroke 7.000 mm
Mast total length 9.800 mm
Mast total weight without tool 4.800 kg
Crowd force 80 kN
Mast displacement 1.000 mm
Side inclination 90 degrees
Mast slewing left and right 180 degrees
Tool choice
Rotary head/top hammer RH16X / RH24X Eurodrill
Piling hammer SPD1000 / SPD2000 SPD
Cat head
Winch H60P Sepson
Max lifting force 20 kN
180° slewing left/right Option
Clamping table
Opening diameter 350 mm
Break out force 100 kNm
Hydraulics
Oil request from excavator auxilliary line X1 < 170 liter@280 bar
Valve manifold PVG32/128 Danfoss
Hydraulic plumbing 0 Gates
Max tank return back pressure < 5 bar
Max drain oil back pressure 0,5-2 bar
Remote control mast attachment
Software SPD (Can bus) Basic
Transmitter and receiver HBC Display
Remote control excavator N/A only complete rig
Trouble shoot online GSM
Detail Specification
Base machine carrier SPD  S25 (Sennebogen)
Engine Cummins B6.7-C260
Engine power (kW) 209 kW @ 1800 rpm
Emission standard Stage 5
Fuel tank 500 Lit
Weight (kg) 29.700
Counter weight 6.6 ton
Undercarriage standard R35/240 track size B60
Width in transport (mm) 3.000 mm
Height in transport (mm) 3.210 mm
Length in transport (mm) 15.500 mm
Track shoes 600 mm
Undercarriage option T27 Telescopic undercarriage option
Width (mm) 3000 mm – 4000 mm
Track shoes 800 mm
Boom type 2 piece boom HD
Boom length 2.6 m
Stick length 3.4 m
Pump max capacity (lit/min) All pumps are divided
Rexroth A11 P1 320 lit/min
Rexroth A11 P2 210 Lit/min
Rexroth A10 P3 132 Lit/min
19 m3 gear pump Optional equipment 30 Lit
Hydraulic tank 460 Lit
Hydraulic oil Panolin HLP Synth 46
Hydraulic micro filter Hydro-clean fine filter
Travel speed 2,2 km/h
Slewing turret brake Double breaks
Controls Totally remote controlled
Remote control SPD/HBC Can bus
Safety valves All cylinders
Painting upper housing, boom RAL1033 Dahlia yellow
Painting under carriage RAL7022 umbra grey
Warranty 24 months or 2000 hrs
Manuals Swedish, English, German
All technical data can be changed without prior notice.

SPD-H

  • SPD Piling Hammers is enviromental friendly hammer series, which offer low noise level, high impact power, and is the ideal piling tool.
  • The energy of piston stroke is accumulated due to charged nitrogen gas in the backhead.
  • The hammers have high piston weight because it ́s needed when piling.
  • Accumulator as high pressure surge dampener, it ́s for protecting pump output of base machine.

THE HIGHEST QUALITY

SPD uses the highest quality materials which are machined by our experienced technicians utilizing state-of-the-art manufacturing technology and production machinery.

SPD’s stringent quality control procedures ensure superior quality hydraulic hammers.

  • Precision machining
  • Strict monitoring of temperatures and time intervals for multi-phase heat treatment processes
  • Precision welding of hammer holders, hammer brackets and adapters
  • Stringent, continuous quality control checks and comprehensive final testing of all SPD hydraulic hammers prior to delivery

Valve

  • Valve housing
  • Accumulator

Tie rod

  • Dynamic screw design prevents damage

Accumulator

  • Reduces irregular pulse pressure on hydraulic circuit
  • Improved striking power with supply of accumulated gas pressure

Extended piston stroke

  • Smoother operation
  • Minimal repercussion on carrier

Improved properties (piston)

  • Improved emergency running properties
  • Manufactured with high-quality nickel and vanadium alloy steel

SPD tool

  • Exceptional performance and reliability
  • Manufactured with high-quality alloy steel

Back head

  • Start-up safety
  • Power accumulator

Lubrication adequate for entire shift

  • Reduced wear and tear
  • Consistent availability due to extended maintenance intervals

Cylinder & valve

  • Prevents scoring with precision finishing treatment

All technical data can be changed without notification.

MD60

MD60 is a rock drill rig made for top hammer drilling, blast hole drilling, foundation drilling, tie-rod, bolting, anchoring etc.

ADVANTAGES

  • Quick coupling between the excavator and the mast that is interchangeable.
  • The wide movement capability and a 360° slewing expands the working area without the need for transportation with crawler.
  • Remote control from Scanreco with Can bus.
  • Universal parts makes it easier to source spare parts on the market.

TECHNICAL SPECIFICATIONS

DRILL RIG MAST
Mast weight without rotation 1,500 kg
Total mast length 6,500 mm
Recommended excavator 16-30 ton
Stroke 5,800 mm
Lateral tilt 360° (slew drive)
Oil need with DF550L > 170 lit/min @ 200 bar
Feed power 25 kN
Feed chain 1″
Feed speed 0-0.5 m/s
Feed beam in steel
Single clamp
Remote control from Scanreco with Can bus
Automatic drilling
Anti jamming
TOP HAMMER FOR BLAST HOLE DRILLING (STANDARD)
Model Doofor DF550L
Weight 152 kg
Rotary speed 100-250 rpm
Torque (160 cm3 @ 210 bar), 975 Nm
Strike power 17 kW
Shank adapter R32, R38, T38 (std) & T45
TOP HAMMER FOR FOUNDATION DRILLING (STANDARD)
Model Eurodrill HD2004
Weight 210 kg
Rotary speed 144 rpm
Strike power < 320 Nm
Frequency < 2.500 bpm
Shank adapter H55LH/RH, H64 LH/RH, H66/R38, R32, R38, R51, T38 & T45, IB30, IB40 & IB52

All technical data can be changed without notification.

MD45

MD45 is a drill rig mast made for top hammer drilling, blast hole drilling, foundation drilling, tie-rod, bolting, anchoring etc.

ADVANTAGES

  • Quick coupling between the excavator and the mast that is interchangeable.
  • The wide movement capability and a 360° slewing expands the working area without the need for transportation with crawler.
  • Remote control from Scanreco with Can bus.
  • Universal parts makes it easier to source spare parts on the market.

TECHNICAL SPECIFICATIONS

DRILL RIG MAST
Mast weight without rotation 1,200 kg
Total mast length 5,000 mm
Recommended excavator 16-30 tons
Stroke 4,200 mm
Lateral tilt 360° (slew drive)
Oil need with DF550L > 170 lit/min @ 200 bar
Feed power 25 kN
Feed chain 1″
Feed speed 0-0.5 m/s
Feed beam in steel
Single clamp
Remote control from Scanreco with Can bus
Automatic drilling
Anti jamming
TOP HAMMER FOR BLAST HOLE DRILLING (STANDARD)
Model Doofor DF550L
Weight 152 kg
Rotary speed 100-250 rpm
Torque (160 cm3 @ 210 bar), 975 Nm
Strike power 17 kW
Shank adapter R32, R38, T38 (std) & T45
TOP HAMMER FOR FOUNDATION DRILLING (STANDARD)
Model Eurodrill HD2004
Weight 210 kg
Rotary speed 144 rpm
Strike power < 320 Nm
Frequency < 2.500 bpm
Shank adapter H55LH/RH, H64 LH/RH, H66/R38, R32, R38, R51, T38 & T45, IB30, IB40 & IB52

All technical data can be changed without notification.

MD33

MD33 is a rock drill rig for top hammer drilling, blast hole drilling, foundation drilling, anchor driling etc.

ADVANTAGES

  • Quick coupling between the excavator and the mast that is interchangeable.
  • The wide movement capability and a 360° slewing expands the working area without the need for transportation with crawler.
  • Remote control makes it easy to operate the machine with full control.
  • Powerful hydraulic clamp table.

TECHNINCAL SPECIFICATIONS

DRILL RIG
Mast weight without rotation 680 kg
Total mast lenght 4,250 mm
Recommended excavator > 6 tons
Stroke 3,300 mm
Lateral tilt 360° (slew drive)
Oil need with DF538L > 160 lit/min @ 200 bar
Feed power 10 kN (Option 20 kN)
Feed chain 3/4″ (Option 1″)
Feed speed 0-0.5 m/s
Feed beam in aluminum
Single clamp
Remote control from Scanreco with Can bus
Automatic drilling
Anti jamming
TOP HAMMER FOR BLAST HOLE DRILLING (STANDARD)
Modell Doofor DF538L
Weight 83 kg
Rotary speed 0-250 Rpm
Torque 295 Nm
Stroke power 13 kW
Shank adapter R32, R38 & T38
TOP HAMMER FOR FOUNDATION DRILLING (STANDARD)
Model Eurodrill HD1001
Weight 80 kg
Rotary speed (86) 224 rpm
Torque 180 Nm
Stroke power 180 Nm
Frequency 3 000 bpm
Shank adapter R44LH/RH, IB30, IB52, R32, R38, T38 eller T 45

All technical data can be changed without notification.

MD18

MD18 is a rock drill rig for top hammer drilling, blast hole drilling, foundation drilling, anchor drilling, etc. MD18 is the same mast as MD33 but with shorter stroke.

ADVANTAGES

  • Quick coupling between the excavator and the mast that is interchangeable.
  • The wide movement capability and a 360° slewing expands the working area without the need for transportation with crawler.
  • Remote control makes it easy to operate the machine with full control.
  • Powerful hydraulic clamp table.

TECHNINCAL SPECIFICATIONS

DRILL RIG
Mast weight without rotation 350 kg
Total mast length 2,200 mm
Recommended excavator > 4,5 ton
Stroke 1,500 mm
Lateral tilt 360° (slew drive)
Oil need with LHD23R > 35 lit/min @ 200 bar
Feed power 10 kN (Option 20 kN)
Feed chain 3/4″ (Option 1″)
Feed speed 0-0.5 m/s
Feed beam in aluminum
Single clamp
Remote control from Scanreco with Can bus
Automatic drilling
Anti jamming
TOP HAMMER FOR BLAST HOLE DRILLING (STANDARD)
Model LHD23R
Rotary speed 320-400 rpm
Torque 65 Nm
Stroke power 32-38 joule
Frequency 40-50 hz
Shank adapter Hex 22 x 108

It is possible to chose from several different top hammers and rotations.

All technical data can be changed without notification.

A7

A7 (DM85) is a drilling mast for foundation drilling, top hammer drilling, blast hole drilling and auger drilling.

ADVANTAGES

  • Excavator and drilling mast together produce more than a traditional drill rig and produce faster.
  • The wide movement capability and a 360° turn expands the working area without the need for transportation with crawler.
  • Remote control makes it easy to operate the machine with full control.
  • Modular – quick coupling between the mast and excavator as well as the feed cradle.
  • Universal parts makes it easier to source spare parts on the market.

TECHNICAL SPECIFICATIONS

DRILL RIG MAST
Mast weight without rotation 4,500 kg
Total mast length 9,000 mm
Recommended excavator 21-36 ton
Mast stroke lentgh 7,000 mm
Lateral tilt +/- 90° (cylinders)
Oil need with§ HD4010 > 245 lit/min @ 200 bar
Feed force§ 100 kN
Feed chain 1 1/4″
Feed speed 0-0.4 m/s
Feed beam in steel
Remote control from SPD with Can bus
CLAMPING TABLE
Opening 350 mm
Min. clamp diameter 45 mm
Max. clamp diameter 350 mm
Break out cylinder power 100 KNm
SERVICE WINSCH
Model Sepson H60P 2,000 daN
STANDARD TOP HAMMER
Model Eurodrill HD4010
Weight 435 kg
Rotary speed (97) 110 rpm @ 150 lit/min
Torque (97) 4.35 kNm vid 200 bar @ 85 lit/min
Stroke power 500 Nm
Frequency 2,400 bpm
Shank adapter R32, R38, R51 & T45, H55, H64, C64LH/RH
STANDARD ROTATION
Model Eurodrill RH1200
Weight 310 kg
Rotary speed (31) 68 rpm @ 150 lit/min
Torque (31) 14.1 kNm at 200 bar @ 150 lit/min
Std. thread 3 1/2″ API Reg Female
Swivel passage 2″

All technical data can be changed without notification.

T13

T13 (DT145) is a drilling mast for foundation drilling, auger drilling and top hammer drilling. 

ADVANTAGES

  • Powerful 15 degree tilt.
  • Remote control makes it easy to operate the machine with full control.
  • Modular – quick coupling between the mast and excavator as well as the feed cradle.
  • Top winch with 180 degree rotation.

 

TECHNICAL SPECIFICATIONS

TELESCOPIC MAST
Mast weight without rotation 6,500 kg
Total mast length 8,500 mm-15,500 mm
Recommended excavator 30-36 tons
Mast stroke length 13,000 mm
Lateral tilt +/- 15° (cylinders)
Oil usage with RH1200 > 150 lit/min @ 200 bar
Feed force 140 kN
Feeding with rope
Feed speed 0-0,4 m/s
Feed beam in steel
Remot control from SPD with Can bus
CLAMPING TABLE
Opening 410 mm
Min. clamp diam. 45 mm
Max. clamp diam. 450 mm
Break out cylinder power 100 kNm
SERVICE WINSCH
Model Sepson H60P 2 000 daN
STANDARD TOP HAMMER
Model Eurodrill HD4010
Weight 435 kg
Rotary speed (97) 110 rpm @ 150 lit/min
Torque (97) 4.35 kNm at 200 bar @ 85 lit/min
Striking force 500 Nm
Frequency 2,400 bpm
Neck adapter R32, R38, R51 &T45, H55, H64, C64LH/RH
STANDARD ROTATION
Model Eurodrill RH1200
Weight 310 kg
Rotary speed (31) 68 rpm @ 150 lit/min
Torque (31) 14.1 kNm at 200 bar @ 150 lit/min
Std. thread 3 1/2″ API Reg Female
Swivel passage 2″

All technical data can be changed without notification.