RH406 Manipulator

Double grab with or without spinner
Length (transport) 2.000 mm
Width 1.400 mm
Height (transport) 1.600 mm
Weight 1.600 kg
Recommended carrier >25 ton
Minimum handling diameter Ø 100 mm
Maximum handling diameter Ø 406 mm (opening 600 mm)
Maximum handling length 12.000 mm
Maximum handling weight 5.000 kg
Maximum spinning torque 8 kNm
Grab system HSP 025C
Hydraulic supply Excavator´s auxilliary line – Danfoss PVG32 3 sections
Recommended hydraulic setting 25-150 liter @ 350 bar + 30 bar
Controls SPD Can bus remote control, with display

Single grab
Length (transport) 700 mm
Width 1.000 mm
Height (transport) 1.400 mm
Weight 330 kg (without quick coupling)
Recommended carrier >25 ton
Minimum handling diameter Ø 100 mm
Maximum handling diameter Ø 406 mm (opening 600 mm)
Maximum handling length 6.000 mm
Maximum handling weight 5.000 kg
Grab system HSP 025C
Hydraulic supply Excavator´s auxilliary lines
Reccommended hydraulic settings 40-70 liter @ 250 bar

Additional equipment
Spinner module Optional
Slew drive for side inclination IMO slew drive
Customer quick coupling for excavator Customer choice, (bolted flange)

AN120

Made in Sweden

Excellent quality-design from Interoc and refined in Sweden
High technology but in a traditional design
Flexible by the machine being modular
Danfoss hydraulics controlled with Can bus
Can bus control means faster and more efficient reaction between controls and hydraulics
Fully remote controlled, HBC remote control, Danfoss Plus1 Micro controller, with SPD’s software
Colour display showing X & Y, feed pressure, length measurement, hydraulic pressure, air pressure, service intervals and much more
Since the machine is remotely controlled, the operator can take the safest place with regard to work moments
GSM for online monitoring, troubleshooting
Cummins quality engine QSB 6.7
High oil flow maximized for well-balanced hydraulic temperature
Environmentally more efficient than most rigs on the market
Low diesel consumption
Fewer hydraulic hoses, equal to less environmental impact and less risk of oil leakage, lower maintenance costs
Fewer power cables, provide easier troubleshooting, but also less risk of problems

Drive engine	Cummins QS B 6.7,CM2350 B136C,
Environmental standards	EU Stage V (5)
Engine output	149 kW @ 2200 rpm
Diesel tank capacity	300 lit
Hydraulic pump output	P1 170 lit/min @ 320 bar P2 170 lit/min @ 320 bar
Hydraulic tank capacity	415 lit
Hydraulic fluids	Mineral oil or biodegradable oil
Length (transport)	7132 mm
Width	2350 mm
Height (transport)	3042 mm
Weight without drill head and magazine	13000 kg
Specific ground pressure	74 kN/m2
Ground clearance	370 mm
Pendelum range of crawlers	+ 15° / – 13°
Travelling speed	2,5 km/h
Traction force	120 kN
Mast length	6415 mm (6065 mm without winch)
Usable cradle stroke (single head)	3870 mm
Usable cradle stroke (double head)	3370 mm
Max. permissible rotation torque for working with rotary head	20 kNm
Feed force	80 kN
Retraction force	80 kN
Feed speed	0-15 m/min
Retraction speed	0-15 m/min
Rapid feed speed	0-60 m/min
Rapid retraction speed	0-60 m/min
Clamping and breaking device	Double Ø250 mm, 50 kNm
Control	HBC/SPD Can bus remote control standard
Hydraulic drifters (available at option)	Eurodrill RH10X, RH16X, RH24X, DH10
Rotary heads (available at option)	Eurodrill RH10X, RH16X, RH24X, DH10
Additional equipment	KBM 130 Arc magazine (7xØ88,9 mm + 7x Ø133mm), Palfinger crane with manipulator, slewing 20 kN winch

Eurodrill

Eurodrill Webpage

Rotary Heads
Top hammers
Double heads
Vibro rotary heads

ABI

Please visit ABI Group for more information:

ABI-Group

RF – X

Rigs and trucks for piling or drilling, and mounting road fence

Road fence machines

We are designing and manufacture piling and drilling rigs for road fences, contact us for a technical meeting and an offer

Se pictures and leaflets

D7-S25 (PM85)

D7-S25 (PM85) is a drilling/piling mast attachment for driving steel piles up to 220 mm, or drilled piles up to 323 mm

BENEFITS

S25 is SPD’s own carrier, specially developed as a carrier and drive source for SPD’s drill and pile masts
S25 is more efficient and better suited than any excavator on the market due to the following arguments
3 large Rexroth pumps, one pump only for rotary, one pump only for percussion, one pump only for set-up functions and feed, normally in a regular excavator there are usually two pumps that are interconnected and you get operational disturbances when the oil is not enough to drive several functions at the same time
Extremely low fuel consumption due to the efficiently designed hydraulic system
SPD telematic, GSM for logging all important machine data, warnings, error codes, troubleshooting, drill data, piling data, fuel consumption, hydraulics log, diagrams online, saved max for two years
The machine is always remotely controlled with CAN bus technology, therefore the cab is not needed, i.e. there are no unnecessary functions, remote control from HBC / SPD
The remote control has a color display for displaying all machine data, drill or piling data
Where the cabin would normally sit, we instead have a heating cabinet for water pumps and water pipes that must not freeze
S25 available with or without extendable undercarriage
The S25 has a powerful Cummins 6.7 liter diesel engine of 209 kW
All machine doors open upwards and form a roof when serviced
All tanks, diesel, adblue, tank pump, central lubrication, electrical cabinets, etc. are easily located on the same side of the machine
2 year warranty on our S25

Model
Mast attachment	D7 (PM85)
Cradle stroke	7.000	mm
Mast total length	9.800	mm
Mast total weight without tool	4.800	kg
Crowd force	80	kN
Mast displacement	1.000	mm
Side inclination	15	degrees
Tool choice
Rotary head/top hammer	RH16X / RH24X	Eurodrill
Piling hammer	SPD1000 / SPD2000	SPD
Cat head
Winch	H60P	Sepson
Max lifting force	20	kN
180° slewing left/right	Option
Clamping table
Opening diameter	350	mm
Break out force	100	kNm
Hydraulics
Oil request from excavator auxilliary line X1	< 170 liter@280 bar
Valve manifold	PVG32/128	Danfoss
Hydraulic plumbing	0	Gates
Max tank return back pressure	< 5	bar
Max drain oil back pressure	0,5-2	bar
Remote control mast attachment
Software	SPD (Can bus)	Basic
Transmitter	HBC	Display
Remote control excavator	N/A only complete rig
Trouble shoot online	GSM
Recommended excavator
Mast mounted in the dipper arm	30-46	ton
Mast mounted in the boom	20-30	ton
Min motor power	80	kW
All technical data can be changed without prior notice.

Detail	Specification
Base machine carrier	SPD S25
Engine	Cummins B6.7-C260
Engine power (kW)	209 kW @ 2200 rpm
Emission standard	Stage 5
Fuel tank	500 Lit
Weight (kg)	29.700
Counter weight	6.6 ton
Undercarriage standard	R35/240 track size B60
Width in transport (mm)	3.000 mm
Height in transport (mm)	3.210 mm
Length in transport (mm)	15.500 mm
Track shoes	600 mm
Undercarriage option T27	Telescopic undercarriage option
Width (mm)	3000 mm – 4000 mm
Track shoes	800 mm
Boom type	2 piece boom HD
Boom length	2.6 m
Stick length	3.4 m
Pump max capacity (lit/min)	All pumps are divided
Rexroth A11 P1	320 lit/min
Rexroth A11 P2	210 Lit/min
Rexroth A10 P3	132 Lit/min
19 m3 gear pump	Optional equipment 30 Lit
Hydraulic tank	460 Lit
Hydraulic oil	Panolin HLP Synth 46
Hydraulic micro filter	Hydro-clean fine filter
Travel speed	2,2 km/h
Slewing turret brake	Double breaks
Controls	Totally remote controlled
Remote control	SPD/HBC Can bus
Safety valves	All cylinders
Painting upper housing, boom	RAL1033 Dahlia yellow
Painting under carriage	RAL7022 umbra grey
Warranty	24 months or 2000 hrs
Manuals	Swedish, English, German

PM85 EC160

PM85 EC160 is a piling rig for driven steel piles up to 220 mm

BENEFITS

The machine is small and light
Transport weight and dimensions makes it easy to transport
Remote system from HBC/SPD makes it reliable and easy to control
The mast and hydraulics are manufactured with parts from the market, so the spare parts are available on the market

Piling rig
Mast weight without hammer	3500 kg
Mast total length	8 500 mm
Mast stroke	7000 mm
Hammer	SPD1000/SPD2000
Side tilt	14°
Oil flow and pressure at the mast	> 130 lit/min @ 200 bar
Crowd force	80 kN
Feeding ropes	2 x 12 mm
Feed speed	0-0,5 m/s
Mast beam	Steel 200 x 200
Carrier	Volvo EC160
Remote Control all machine	Scanreco
Total weight	20 ton

Frontloader

BM front loader with Quick coupling for wheeled excavators 14 – 16 tons.

BENEFITS

A tool-carrier for wheeled excavators, to use bucket, forks, or other tools
Models for Volvo, CAT, Liebherr, Komatsu, Doosan, Terex, Hitachi, Atlas
Remote Control from Scanreco, reliable and easy to install
The valve manifolds on the frontloader is feeded from the dozer blade hydraulics

Frontloader
Weight	550 kg
Lifting capacity	1500 kg
Lifting height	approx 600 mm
Quick coupling	BM hydraulic coupling
Tilt	Yes
Hydraulic oil	40 – 60 lit/min @ 250 bar
Controller	Remote
Hydraulic feeding	From dozer blade valve
Electric feeding	24 Volt plus and minus
Carriers	14 – 16 ton

Options

Download otpions catalogue

Drilling equipment

Options

Adaptors

Spare parts

T13-S25

T13-S25 built for Foundation drilling up to 450 mm diameter as standard.

BENEFITS

S25 is SPD’s own carrier, specially developed as a carrier and drive source for SPD’s drill and pile masts
S25 is more efficient and better suited than any excavator on the market due to the following arguments
3 large Rexroth pumps, one pump only for rotary, one pump only for percussion, one pump only for set-up functions and feed, normally in a regular excavator there are usually two pumps that are interconnected and you get operational disturbances when the oil is not enough to drive several functions at the same time
Extremely low fuel consumption due to the efficiently designed hydraulic system
SPD telematic, GSM for logging all important machine data, warnings, error codes, troubleshooting, drill data, piling data, fuel consumption, hydraulics log, diagrams online, saved max for two years
The machine is always remotely controlled with CAN bus technology, therefore the cab is not needed, i.e. there are no unnecessary functions, remote control from HBC / SPD
The remote control has a color display for displaying all machine data, drill or piling data
Where the cabin would normally sit, we instead have a heating cabinet for water pumps and water pipes that must not freeze
S25 available with or without extendable undercarriage
The S25 has a powerful Cummins 6.7 liter diesel engine of 209 kW
All machine doors open upwards and form a roof when serviced
All tanks, diesel, adblue, tank pump, central lubrication, electrical cabinets, etc. are easily located on the same side of the machine
2 year warranty on our S25

Model
Mast attachment	T13 (DT145)
Cradle stroke	13.000	mm
Mast total length	10.800-18.000	mm
Mast total weight without tool	6.500	kg
Crowd force	140	kN
Mast displacement	1.000	mm
Side inclination	15	degrees
Tool choice
Rotary head/top hammer	RH16X / RH24X / RH32X	Eurodrill
Piling hammer	SPD1000 / SPD2000	SPD
Cat head
Winch	H60P	Sepson
Max lifting force	20	kN
180° slewing left/right	Option
Clamping table
Opening diameter	450	mm
Break out force	100	kNm
Hydraulics
Oil request from excavator auxilliary line X1	< 170 liter@280 bar
Valve manifold	PVG32/128	Danfoss
Hydraulic plumbing	0	Gates
Max tank return back pressure	< 5	bar
Max drain oil back pressure	0,5-2	bar
Remote control mast attachment
Software	SPD (Can bus)	Basic
Transmitter	HBC	Display
Remote control excavator	N/A only complete rig
Trouble shoot online	GSM
Recommended excavator
Mast mounted in the dipper arm	>46	ton
Mast mounted in the boom	25-36	ton
Min motor power	80	kW
All technical data can be changed without prior notice.

Detail	Specification
Base machine carrier	SPD S25 (Sennebogen)
Engine	Cummins B6.7-C260
Engine power (kW)	209 @ 1800 rpm
Emission standard	Stage 5
Fuel tank	500 Lit
Weight (kg)	29.700
Counter weight	6.6 ton
Undercarriage standard	R35/240 track size B60
Width (mm)	3.000
Track shoes	600 mm
Undercarriage option T27	Telescopic undercarriage option
Width (mm)	3000 mm – 4000 mm
Track shoes	800 mm
Boom type	2 piece boom HD
Boom length	2.6 m
Stick length	3.4 m
Pump max capacity (lit/min)	All pumps are divided
Rexroth A11 P1	320 lit/min
Rexroth A11 P2	210 Lit/min
Rexroth A10 P3	132 Lit/min
19 m3 gear pump	Optional equipment 30 Lit
Hydraulic tank	460 Lit
Hydraulic oil	Panolin HLP Synth 46
Hydraulic micro filter	Hydro-clean fine filter
Travel speed	2,2 km/h
Slewing turret brake	Double breaks
Controls	Totally remote controlled
Remote control	SPD/HBC Can bus
Safety valves	All cylinders
Painting upper housing, boom	RAL1033 Dahlia yellow
Painting under carriage	RAL7022 umbra grey
Warranty	24 months or 2000 hrs
Manuals	Swedish, English, German