RH406

English

Double grab with or without spinner
Length (transport) 2.000 mm
Width 1.400 mm
Height (transport) 1.600 mm
Weight 1.600 kg
Recommended carrier >25 ton
Minimum handling diameter Ø 100 mm
Maximum handling diameter Ø 406 mm (opening 600 mm)
Maximum handling length 12.000 mm
Maximum handling weight 5.000 kg
Maximum spinning torque 8 kNm
Grab system HSP 025C
Hydraulic supply Excavator´s auxilliary line – Danfoss PVG32 3 sections
Recommended hydraulic setting 25-150 liter @ 350 bar + 30 bar
Controls SPD Can bus remote control, with display

Single grab
Length (transport) 700 mm
Width 1.000 mm
Height (transport) 1.400 mm
Weight 330 kg (without quick coupling)
Recommended carrier >25 ton
Minimum handling diameter Ø 100 mm
Maximum handling diameter Ø 406 mm (opening 600 mm)
Maximum handling length 6.000 mm
Maximum handling weight 5.000 kg
Grab system HSP 025C
Hydraulic supply Excavator´s auxilliary lines
Reccommended hydraulic settings 40-70 liter @ 250 bar

Additional equipment
Spinner module Optional
Slew drive for side inclination IMO slew drive
Customer quick coupling for excavator Customer choice, (bolted flange)

AN120

Made in Sweden

Erinomaista laatua – Interocin suunnittelua ja Ruotsissa jalostettu
Huipputeknologiaa, mutta perinteisellä muotoilulla
Monipuolinen koska kone on modulaarinen
Danfoss-hydrauliikkaa ohjataan Can-väylän kautta
Can-väyläohjaus sallii hydrauliikan nopeampaa ja tehokkaampaa ohjausta
Täysin kauko-ohjattu, HBC kaukoohjain, Danfoss Plus 1 Micro-kontrolleri, SPD: n ohjelmistolla
Värinäyttö, jossa näkyy X- & Y-kulmat, syöttöpaine, pituuden mittaus, hydraulipaine, ilmanpaine, huoltovälit ja paljon muuta
Koska kone on kaukoohjattu, käyttäjä voi hakea, työpaikkaa nähden, turvallisimman paikan
GSM seurantaan, vianmääritykseen
Cummins laatumoottori QSB 6.7
Korkea öljyn tuotto maksimoi tasapainotetun hydrauliikan lämpötilan
Ympäristöystävällisempi kuin useimmat poravaunut markkinoilla
Matala polttoaineenkulutus
Vähemmän hydrauliletkuja, yhtä kuin vähempi ympäristövaikutus ja vähempi öljyvuodon riski, vähemmät ylläpitokustannukset
Vähemmän sähkökaapeleita, helpottaa vianmääritystä ja myös vähemmän ongelmia

English
Drive engine	Cummins QS B 6.7,CM2350 B136C,
Environmental standards	EU Stage V (5)
Engine output	149 kW @ 2200 rpm
Diesel tank capacity	300 lit
Hydraulic pump output	P1 170 lit/min @ 320 bar P2 170 lit/min @ 320 bar
Hydraulic tank capacity	415 lit
Hydraulic fluids	Mineral oil or biodegradable oil
Length (transport)	7132 mm
Width	2350 mm
Height (transport)	3042 mm
Weight without drill head and magazine	13000 kg
Specific ground pressure	74 kN/m2
Ground clearance	370 mm
Pendelum range of crawlers	+ 15° / – 13°
Travelling speed	2,5 km/h
Traction force	120 kN
Mast length	6415 mm (6065 mm without winch)
Usable cradle stroke (single head)	3870 mm
Usable cradle stroke (double head)	3370 mm
Max. permissible rotation torque for working with rotary head	20 kNm
Feed force	80 kN
Retraction force	80 kN
Feed speed	0-15 m/min
Retraction speed	0-15 m/min
Rapid feed speed	0-60 m/min
Rapid retraction speed	0-60 m/min
Clamping and breaking device	Double Ø250 mm, 50 kNm
Control	HBC/SPD Can bus remote control standard
Hydraulic drifters (available at option)	Eurodrill RH10X, RH16X, RH24X, DH10
Rotary heads (available at option)	Eurodrill RH10X, RH16X, RH24X, DH10
Additional equipment	KBM 130 Arc magazine (7xØ88,9 mm + 7x Ø133mm), Palfinger crane with manipulator, slewing 20 kN winch

Eurodrill

Rotary Heads
Top hammers
Double heads
Vibro rotary heads

Delmag RH34

The RH 34 is the largest machine of the classic drill rig series ABI manufactures at this time, mounted onto the ABI carrier. Next to the Kelly method it is possible to use a CFA auger, part or full displacement tool, VDW-system and DDK-system on this machine

Delmag RH30

The drilling rig RH 30 is mounted onto the ABI carrier. Next to classic drilling methods like Kelly drilling or drilling with the continuous, part or full displacement auger, it is also possible to work with a DELMAG diesel pile hammer on this machine

Delmag RH24

The drill rig RH 24/270 was developed for drilling with or without casing and for part and full displacement augering. The rotary head is equipped with Docking-System for easy and quick set up. The drill rig RH 24/270 is also as short mast available

Delmag RH18

Next to classic drilling methods like Kelly drilling or drilling with the CFA auger, it is possible to work with a VDW-system (in front of the wall) on this machine. Another merit of this machine is the transport possibility inclusive rotary head and 21 m long Kelly bar.

Delmag RH12

The RH 12/140 can be used to install cased and non-cased piles, using the Kelly method. It is also possible to use the CFA auger system with this machine. The set-up / break-down times on the jobsite are short because the rotary head and the kelly bar can stay on the machine for transport.

ABI TM22

Telescopic Leader Mast TM 22

The new designed ABI MOBILRAM-System TM 22 combines for years gathered practical site and design experience. The new rugged telescopic leader mast has a torque absorption of 200 kNm. Inner and outer mast are both designed as closed profiles and fit into each other. Large pre-stressing forces and high torsional rigidity can be realized with smaller material input. In addition the friction losses in the mast are reduced.

ABI TM20

Telescopic Leader Mast TM 20

The MOBILRAM-System TM 20 is a telescopic leader mast of the new generation designed on H kinematics. It combines the benefits of the smaller TM 17 with more usable length