Mast |
DT145 |
Detail |
Specification |
Purpose |
DTH, CFA, pre drill, foundation drill |
Mast weight without tool |
6.500 kg |
Total mast length |
10.800 mm – 18.000 mm |
Recommended excavators |
32 – 48 ton |
Cradle stroke |
13.000 mm |
Lateral tilt |
+/- 15 degrees (cylinders) |
Crowd force |
140 kN |
Feeding type |
Cylinder,2*12 mm rope, (cable) |
Mast displacement |
1000 mm |
Excavator coupling/connection |
Boom connection, pinned |
Control system, remote system |
SPD CAN bus |
Micro controller |
Danfoss Plus1 |
Software |
SPD |
Voltage |
24 V |
Transmitter |
Wireless transmitter/receiver HBC |
Option transmit |
Cable control, cable included |
Display |
Colour display |
GSM, access remotely |
Yes |
Digital documentation |
Yes |
X & Y |
Displayed on the remote |
Feed pressure |
Displayed on the remote |
Rotary pressure |
Displayed on the remote |
Percussion pressure |
Displayed on the remote |
Air pressure |
Displayed on the remote |
Depth measure display |
Option |
Feed speed display |
Option |
Rotary RPM display |
Option |
Jet grouting set up |
Option |
Hydraulic manifolds |
Modular Danfoss PVG32, 128 |
Max tank back pressure |
<5 bar |
Max drain line back pressure |
0,5-2 bar |
Clamping table diameter |
Ø450 mm |
Break out cylinder force |
100 kNm |
Recommended drill heads |
RH16X/RH24X/RH32X |
Recommended piling hammer |
SPD1000/SPD2000 |
Service winch |
15 kN |
Cat head slewing |
180° |